Simple functional vice to the garage with his own hands

Very often during the repair it is necessary to something to cut, process, sanded. It is much easier to carry out these manipulations with the vise. In this review, I'll introduce you to the invention which can be made with your own hands. (How does this work will show at the end)

**The hero of our review, which will help you in the garage**

There are several kinds of clutches for different jobs. But not everyone has the opportunity to install them in your shop or garage. The author proposed an interesting idea that I was interested.

on review vises with their handsLet's try to consider in more detail this device.

Idea

Grade 5 of 5

It's no secret that a tool like gripe greatly facilitates the execution of various works.

The invention of the author will be useful for those who often work with metal pipes, profiles, or other large objects. To perform such manipulation, as cutting, trimming, grinding, etc., with the vise considerably simplified. Therefore, the assessment of this section, you can give the maximum.

instagram viewer

The process of cutting a metal tube to create a vise

Perhaps if you already have a gripe prefabricated, you are not interested in the invention of the author.

However, I advise you to look at it, because the author has offered a decent alternative to professional tools.

Design

Evaluation 4 of 5

The design of this tool is very simple. The movable part of the grip is formed of metal pipe. To one end of the pipe and welded to the base of the nut, which is screwed rod. By means of this threaded connection can regulate the degree of compression.

Anchoring the resulting preform on the frame

To the other end of the tube is welded corner, which performs the function of both cheeks from the clutches of the factory. To better secure the objects of the same area is welded to the base.

As the base, the author used a channel, in the middle of which is welded a stop for the stability of the mobile part. The tube is attached to the abutment by means of bolting.

The process of installing the clamps on the frame of the clutches of their own hands Garage

In these clutches will be convenient to clamp the pipe metal rolling, wooden blocks.

About the flat parts are not sure, because the corners will not adhere to the object is fixed. Summarizing the evaluation of this design, it is possible to note a particular advantage is the simple creation of such a tool.

Design

Evaluation 2 of 5

The appearance of these clutches is poor. If the author painted a vice, they would certainly look better steel.

analogs

Grade 5 of 5

Analogues of the present invention, there are many and they are all different in purpose, size and price. For example, bench vise cost from 500 rubles and more expensive depending on the size and design. The price of the pipe vise starts from 1400 rubles.

If you have lying around the pipe and channel segment you like and know how to tinkering with his hands in the garage, then you may well be able to make such tool.

And it does not spend nearly a dime. Therefore, for saving the author receives 5 out of 5 points.