My Laying nets. Fittings in a row

Spatial reinforcement - a guarantee of the reliability of the concrete structure. But is it so important Laying nets?

Greetings to all who became interested in this topic. My construction continues here, formwork under Laying nets readyIt's time to reinforcement.

Those who have read the previous articles know that arpopoyas I have a relatively small cross-section of 100 to 150 mm, in my opinion, enough for my home.

❗ And here there is another important question: as putting reinforcement? Or rather how many rows.

And, frankly, I have no confidence stillI did the right thing.

But still, I proarmiroval rods in one row of 10 mm.

And here I am repelled by the functions to be performed by my Laying nets.

1️⃣ load from the rafters and ceiling It will only be vertical, as the rafters and floor beams will be tied in a loop. And a strong lateral pressure (as in the case of supporting only the rafters on mauerlat), will not be.

2️⃣ Bending and stretching. Accordingly, I do not think Laying nets should be treated as "beam" (as in the case of the foundation). And if such a situation arises, the masonry already "kapets".

instagram viewer

3️⃣ Fixing mauerlat(Via pins) - is, in my case, my main task Laying nets.

And everything by the rules:

Ligation of reinforcement, even with the stock.
Strengthening angles.
Indents from the edges.

Single story - it beams over the span.

Its ✅ section 200 to 150 mm. And here I let the top two rod valves (which goes through the compound with the rest of the belt), And the bottom four.