I exhibit studs in Laying nets. +/- few mm.

The ideal result! I once - something happens?

I did not think it would be so much trouble with this Laying nets. But finally the last thing before pouring.

Construction of studs and rebar, which I Navariya, you need to put into place.

When installing the main thing to take into account the following points.

1️⃣ Studs must stand one line, For easy installation mauerlat.

2️⃣ Fitting pins should not cross with future joists and rafters.

And so, everything else seemed trifling matter.

But the nuances can not be avoided ...

The first thing we expose corner studs as with blocks. And between them stretch the "prichalku". And the others are putting on it.

❗ Although I calculate in advance the length of pins considering mauerlat thickness, still need it to control the installation.

And to the bottom of the studs are not "walking" I drilled small holes and pins deepened in the box.

But put all the pins perfectly I did not succeed.

So I put them together with the main reinforcementThrough welded to them rods, it was difficult to stand upright and perfect at the same time secure fit.

Therefore, small deviations is still there.

But these details do not interfere with the installation mauerlat. Hole slightly larger diameter, allowed to play in the right direction.

✅ now it remains the most difficult thing - pouring concrete.

🔹SUBSCRIBE TO THE CHANNEL🔹 and put the Huskies. And do not miss the most interesting process.