What is the climate in a country house? How to maintain it?

RULES care of the house of laminated veneer lumber. Climate control, and defect detection

In our previous article, I began a detailed review of A Guide to Home Care of laminated veneer lumber, which, like any other timber may be subject to various negative influences. To protect the building from their influence, and to continue operation of the house for many years, it is necessary to follow some rules, which I will continue to talk in this blog.

To save a presentable appearance of the wood is especially important to maintain a certain temperature and humidity indoors. It may seem that the retention of such a microclimate in the home may impose some restrictions on the residents. But it is not so, because the optimal mode to maintain just enough! In the house where properly installed heating and ventilation system, nothing to worry about. To avoid sudden changes in temperature. The main thing is that the temperature has always been positive. It is sufficient to 5-10 degrees.

Another important factor - the processing timber ends. Frequent putting and cracking at the ends of the slats occurs precisely because of the absence of this treatment. For this purpose there is a special wax and oil.

It is also very important to maintenance and repair of the house of laminated veneer lumber. Several times a year, it is important to inspect the house for defect detection, which allows in case of danger quickly eliminate them. When viewed from the house, I personally pay attention to such things as:

1) Status of external and internal walls, the identification of possible defects.

2) The state of the roof at home, any damage which may have a significant impact on the microclimate inside the house.

3) The state of drainage system. It is necessary to ensure that excess moisture does not enter the walls of the house with heavy rainfall.

4) The state of contraction of the whole house, the state of the stock timber pillars, safety bolts and other items in the house design.

In order not to miss new articles subscribe to the channel!
Like put, if this post was helpful to you!