The sun came out, flowed waterproofing. Effect on strength of the masonry.
This heat wave in early June, not long ago. And here the first surprise, she brought.
In one of the articles I wrote about how did the shutoff waterproofing between the foundation and walls. And then I had my doubts use bitumastic Stekloizol for bonding to a foundation.
And now there was a nasty thing to which I do not know how to treat.
mastic flowed
All this is enhanced by thirty-degree heat and constant sun. Eit can be clearly seen because the other side of the house where the sun do not have such abundant streams of mastic to be seen.
✅ I certainly understand that things are not spilled, but there are doubts about one.
Impact on aerated concrete masonry.
🔽 When I was doing the waterproofing, the certain layer of mastic applied unevenly. Now when the mastic is squeezed out of the masonry, it turns out the wall, too, sit unevenly.
🔼 Thus in some locations, between the foundation layer and the solution, which was mounted on a first row, may form voidsand bearing on the foundation will pointAnd not the entire plane of frozen solution.
That I may be saved?
No information about the problems with this phenomenon, I have not found. And I can only console myself sam.😑
1️⃣ I Mastic applied a thin layerAnd even if something is spilled, it will be fractions of a millimeter. And this is unlikely as that will affect the integrity of the walls.
2️⃣ The layer thickness of the cementsolution in the first row ranges from 10 to 35 mm. Moreover, the strength of it was very good (M-500 cement, 1 to 3 with sand). And I think he did not even stand a uniform bearing at all on the foundation.
3️⃣ Already put nine rowsAnd everything seems to be fine. Another three series and roof. I think if something can happen and has happened to at this stage.
4️⃣ And in the end I do not come up with it myselfAnd I did, like, according to the technology. Hence, perhaps, such a tech mastic is possible, and may not affect the reliability of masonry.
❗ In any case, nothing can be corrected. But how and when laying the waterproofing of the shut-off I hardship, and realized that it is easier simply to unroll a roll Stekloizol and does not stick, and now I can confirm their previous findings.
And building continues. 🔹 SUBSCRIBE TO THE CHANNEL 🔹 and put huskies 👍.