How to replace the broken handle on obushkovoy saw. templates handle

I came once to visit his nephew, I look at it lying obushkovaya saw with a broken handle.

- What not fix? - I ask him.

- Yes, she does not need me. Take it if you want. - said the nephew.

So I took. Pen to do something is always possible.

Here's a drink I got.

I found on the Internet template to handle. I picked up the material for handles - dosochki beech.

Patterns such handles can be downloaded from here this site.

Saw disassembled and cleaned cloth.

Next sawed pattern handle.

Additionally marked on the template bevels and rounding on the handle. These places I first held rasp, and then sandpaper.

It was found that the holes on the saw blade and place to mount, are not suitable for this pen.

But it is easily corrected. I sawed off the excess, and a second hole drilled in a new place.

The holes made by M6 screws.

The handle also drilled holes on the markup. first with both sides make an indentation in the drill bit 10 mm., to drown head bolts and nuts. Then drilled with a 6 mm drill.

M6 nut can be tightly put in a 10 mm hole.

Next propyl made for the saw blade

Finally polished handle and put it in place.

The handle turned to the convenient rarity. In hand sits like a glove.

How it was done, you can also look at the video.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.