No hand hacksaw? 5 minutes did luchkovye saw

Repairs over. Most of the instrument drove into the garage (including a hacksaw). As luck would have it, that very day my daughter came home from school with a special order: "Dad, we have conducted a contest, help make a bird feeder." And so much it is lit in the idea that it was clear - we must do it now.

Remained paint. I have not thrown trim materials. That's just cut it all the finger - a dubious pleasure. It saved only by the fact that there was a "in the bins homeland" painting by bilateral hacksaw for metal. Quickly fashioned a bow-shaped saw for him.

Long rail cut in half. On the one hand longitudinal propyl he made to a depth of the saw blade. Here, but on the other face drilled holes for fixing screws. The middle portion of the blank has a slight indentation tenth bit. On the opposite edge of the knife stabbed notches to hold the "string".

Strips cut from a second blank centimeter shorter than the length of the web. Almost drew it on both sides. Fortunately, for the tension of a bowstring just came up short remaining scrap. Do once cut cloth rimless did not want to. However, after the assembly of devices saw was a joy.

While sawed parts for feeders found substantial defect. Due to the small contact area of ​​the spacer member with the holders web structure holds bad shape. It is better if the spacer will be slightly stretched vertically. I spun on the outer sides in the girth of the screws and the problem disappeared.

Trying to make such a saw, to save money, one probably should not. Prices for Chinese hacksaw for metal more than affordable. However, it happens that you have a canvas, and the store to buy a hacksaw not. Or local hozmage available only fabric. Then, such a construction has a right to life.

Throw the saw after use me something felt sorry. Lightly abrade it. Let it lie. That's what happened in the end.

Thank you for reading. If the article has been helpful, subscribe to a channel and, of course, put your finger up 👍.