Useful content

Tripod for camera and the smartphone of the pipes PPR. Well it is very convenient!

click fraud protection
Picture 1.
Picture 1.

Tired to put the camera down and smartphone horrible, spending every time this "tower" a lot of time, so I decided make a more or less normal tripod shooting chance vertically and horizontally and a simple mechanism for changing the angle tilt. I spied idea and modernized. Project budget 250-300 rubles.

As a base used in polypropylene tubes pipes 20 and 32 mm for soldering.

Rack and leg

Picture 2.
Picture 2.

In the manufacture of the rack matter 60 cm of tube 32 mm. At one end of it to the rigidity had to score a wooden chop length of 10 cm. In 3 cm from the lower edge of the three drilled holes through 120 degrees until the middle of the pipe where chop. Further, the hole-boiled incised fastening studs of clips 8 mm in diameter, as picture 3.

The legs are made of tube 20 mm in length 50 cm. The ends are also attachable clogged wooden insert to the pipe when tightening the nuts crumpled.
Picture 3.
Picture 3.

Top tube is inserted into the bar extension tube, which end plugged Chopik, and from above by self-tapping threaded fastener 20th pipe. At the upper end of the bar made cuts crosswise extension for tightening. Screed used crimp clamp screw

instagram viewer
(Photo 4).

Picture 4.
Picture 4.

To the top, the most important part of the tripod, the interval needed thin tube length of 30-35 cm (Photo 5). Attaching a camera on it made from a single bolt of 6 mm, which drilled hole. This camera and bolt is screwed.

Photo 5.
Photo 5.

A smartphone had to make a pair of holders. Each of them consists of two soldered together under the pipe fastenings 32 mm, and a soldered and unfolded at 180 degrees under the pipe fastening 20 mm. Average clamps large attachments povyrezal (Photo 5).

Photo 6.
Photo 6.

At further basic rack fastened two more interconnected with a screw movable mount 20 and 32 mm for the top moving portion tripod for vertical recording.

picture 7
picture 7

The assembled structure looks like and does not take up much space. We emphasize that all fasteners under the pipe had an additional warm up and bend to themselves was not turned on pipes. Well, what do you say?

Evaluate material andsign upCanal.

ANDit is interesting:

Without cut tiles Tile. simple device
The mask of plastic bottles from dust for 5 minutes. For grinders, cutting grooves, ceiling - super!
How to enable European plug socket in the Soviet without an adapter
A friend suggested: sharpening drills without special tools
Drill stand from old spare parts

Drill stand from old spare parts

I welcome regular readers and guests of the channel. Today we will make a drilling machine from a...

Read More

Is it possible to disguise a house and not pay property tax

Is it possible to disguise a house and not pay property tax

After the house is built, real estate taxes (if the house is registered) are added to its mainten...

Read More

Technology of pouring artificial stone without molds for garden paths

Technology of pouring artificial stone without molds for garden paths

Self-builders and summer residents constantly come up with techniques, and even entire technologi...

Read More

Instagram story viewer