Special tools for aerated concrete. What I did not spend the money?

Home construction - is not only a variety of building materials, but also a large number of tools.

For me, the tools generally became a separate topic. Mainly because, prior to the construction of his house, I almost did not have any toolsAnd all need to buy from scratch.

I do not think this is some kind of disadvantage, because in his house tools are always handy. And spend money on the thing that you will gain a lot of time, not at all sorry.

However, in construction there are a lot of specific tasks for which the need for special tools. And the most important thingThat the average person may need only once.

Specifically, operation with gas concretes has its own characteristics.

Here's something you can rent (eg power tools), and some things you can do yourself.

Elbow for cutting aerated concrete.

This device is much easier to work with sharp gazoblokov.

In the store it costs about 700 rubles. Money is of course small, but why give them for the thing that you'll never come in handy. Especially, it can be easy to do yourself.

• To do this I took a scrap Profile 40h20. I clean it and cut into parts.

• Then he took a block and mark it on the correct position of the future gon. And then, in this layout, fixed part with screws.

• Was all scald

Fixing detail a must to welding it's not "led". But welding from one side will suffice.

Manual wall chaser.

In general, what exactly do Stroebe, I have not exactly decided. The network can find a number of different examples, and manual or motorized. Probably I will try all options and choose what is best for me.

But the manual option in any case, you need somewhere to take.

The stores average price of 600 rubles.

The design is simple, the main thing to cut, and so it can be made of the fact that there is.

• Take all the same profile and cut parts.

• Collect by welding, and the instrument is ready. On a small piece to try... It seems to be cut. How will actually see.

Grater for aerated concrete.

This thing I remember especially.

I went to the store to see what it is and how much it costs? There are different designs, but I came across a tool made from a "nail plate" stuck to the board with a pen. As soon as all this is about 700 rubles.

And in the same store a "nailing plate" costs 120 rubles ...

I chose, I think it is clear. :)

• Board, plate, four self-tapping - the instrument is ready, the money in your pocket!

Is it worth it?

In fact, all this is for me not only a question of economy.

Of course you can buy it all, and 1500 rubles will not even be visible in the total cost of building a house. But samostroyschika I, It is a matter of principle. Especially, special knowledge and effort it requires.

What I do is going to use, see the following articles on my channel ...