How quickly do a simple miter box

A situation when you need to cut moldings, lath or bead at angles of 45 ° and 90 ° do not occur often. For these purposes, it is not necessary to buy miter saw can do the good old miter box.

Miter box which will be discussed further, can be made from scrap materials in just a few minutes. It will take a couple of bars and a small dosochki.

This is the "long-forgotten old." Previously carpenters actively used like miter box.

As you can see from the photo it is simple - one bar to fasten dosochki bottom and the other from the opposite end. Lower the bar serves as a support when the miter box is pressed to the desk at work. The second bar is screwed to the end to when it will be sawn corners, he remained complete.

Cuts in the bar made for marking gon can be the same hacksaw, which will be cut. For most angles other than a right angle and it has the opportunity to mark 45.

If the bench has yews, the miter box is easy to squeeze in such tisah.

Such a miter box allows you to quickly and accurately cut bead Profiled rail for frames ...

For greater clarity, I offer a short video demonstration of the miter box.

The advantages of this Miter - quick to make, easy to hold during operation, sufficient accuracy and ease of replacement when worn.

Thank you for reading and... until the next publication.

I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

On a note:

All articles of this channel is based on materialsmysite -"Joinery"

Other publications in the channel:

What can be made of old boards

How to make a long clamp for a few minutes.

How to sharpen knives for planer at home

"Folding" decorative basket. Sawing on the jig machine.