Why is my other favorite machine
In the last article I said that the circular saw - is a machine with a very great potential and it is perhaps the most commonly used tool in my workshop.
Most often on the circular saw certainly make cutting material using the rip fence. In addition to the rip fence can be done in a quarter of the sample, making longitudinal grooves, cut the edge at an angle and make a chamfer on the details and even align the edge of both the Planer.
About how the circular saw can be used as a planer machine, I will cover in another article.
It is only on the rip fence. And if one uses a cross sawing using simple devices, it is possible to trim the preform to cut at any angle, to make the transverse slots.
In addition to the circular saw can be cut thicker boards thin and it also expands your opportunities.
Dosochki for this box were made on a homemade table saw.
With this machine you can also do bending parts.
Even using a circular saw milling can be done. This can be used, for example, in the manufacture of facades, plinths and cornices.
Also on the circular saw can make a variety of joinery connections - finger joints, different variants of box connections. compound on the condition, on the condition in a half-tree and others.
I was doing quite well on the circular saw connections for window frames. And I saw the craftsmen, who were used as a circular saw and lathe made table legs and round bowls.
As you can see the machine with huge possibilities and further I will try to tell more about these options.
Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.
Alexander.
Other publications in the channel:
Circular saw for beginners. A pair of receptions
A circular saw. Simple things for beginners
On a note: All the articles of the channel based on materialsmy site -"Joinery"