What hardware is better to install the sheets of corrugated board in the fence

Each owner chooses fence, based on their capabilities and preferences. Some people prefer the wooden fence, someone - plastic. However, the large number of those who favored the fence of corrugated board. And this choice is understandable, since the steel sheet - is a material that is able to provide a solid protection as from dishonest people, and from prying eyes. However, if you choose this fence should pay special attention to the hardware, which should be not only reliable, but also easy to use. How does fasteners most often used when installing the fence of corrugated and which one is better?

Most often in the course of such works are used rivets and screws. About them we'll talk today.

Rivet fastening: so whether it be good?

The main advantage of rivets consider the fact that in the case of their use can be almost completely protect yourself from theft sheets from the fence. Proponents of this view based on the fact that the rivets significantly complicate the thieves fence encroached on the process of dismantling the constituent sheets. But looking face it, this fact can be considered questionable. Even a no-brainer that if there is a great desire can steal those plates that appeared to be welded tightly.

If the rivet fasteners still appeals to you, then you should not forget the following important points:

• riveting process is rather laborious, since to start with riveting can only after a drilled hole for the rivet;
• preparation of rivet holes requires special care: even with a small excess of the diameter of the holes there are significant problems in the course of the riveting;
• drill must be very accurately select the size. Moreover, they often break down, especially if the work involved is not a professional, so the hand must constantly have an ample supply of them.

The fasteners are attractive as roofing screws

The attractiveness of roofing screws comprises the following points:

• high speed with them, as their installation does not require pre-drilling;

Many practically important information about roofing and other samorezah you will find Here in this article.

• the presence of coloring makes them invisible on the surface of the sheeting;

• This fixture is able to easily enter in a fairly soft metal tubes, usually being the support structure of the fence.

So, comparing the advantages and disadvantages of fastening with rivets and roofing screws, it is possible to every reason to believe that the fixture via the latter is more attractive and user-friendly performance. As for the opinion of most Vandal rivets, it should be remembered that, for the Vandals, working professionally, the big problem they did not make.

R. S.

Among our readers, for sure, there are specialists who know the deeper intricacies of the issue. We will be glad and grateful if you leave in the comments some corrections and clarifications.