Cry plastic windows. How do I correct the defect in 30 seconds

I wrote earlier, How to choose a plastic window and made no mistake with a window company. However, in the winter in the coldest days still came out the window, and in the summer also sagged leaf. He called the Installer of the guarantee. As it turned out, to eliminate the disadvantages of a lot easier than I thought.

As the guys worked on the installation I liked. Besides, I've seen that, and they did. Therefore, when the tread condensate thought there was no blame on the school curve hands of installers. Even calling them did not.

In the summer, when the slats sagged a little and began to scrape at the opening, called the master. He promptly came and adjusted the fittings. In any case, I told him the story of the appearance of condensation and showed a photo. Surprisingly, it is in a second diagnosis.

A little background. Immediately after I put the window, planned insulation of the balcony. On both sides of the opening will be narrowed due to a heater. Accordingly sill have to shoot and cut. Therefore, by mounting the window sill I refused, "he put it."

First, that the master asked after viewing the photos, "I was just window-sill set? Strange. " She reminded him how everything was. Installer confused lack of silicone at the junction of the sill and frame. He explained.

According to the technology joint profile and window sill need to be sealed, or may be blowing. Air movement is, of course, there is a minimum, but it is sufficient condensation. Master walked through the joint sealant and assured that this winter will be all right.

When thinking in terms of heat engineering, I am fitter, of course, agree. Although little hard to believe that the air in the room passes through the thin seam. Too much in his way obstacles. We'll see))

Doubts doubts, but the rest of the window just in case I missed the very silicone. They are wooden, long ago dried up, butt broke a few millimeters and silicone from it fell. Yes, in the old windows, too, was at the junction of silicone!

Maybe someone this small change will help prevent condensation on the windows. And I have that's all. Thank you for reading! If the article was helpful, subscribe to the channel. Best thanks - your 👍 Like and repost.