Milling attachment pattern. The upper pattern

This simple device can significantly enhance the ability of your router.

The design of this device is quite simple - it is a kind of bar that is installed on milling machine table and at the end of the rod attached to the base diameter of the pin like a cutter that use.

This device is placed so that the pin is directly over the mill.

Next are a few photos of one of the variants of its application

For example, you need to make several identical shaped parts. Blanks can cut it out rudely, but to mark the line remained blank.

Next to the double-sided tape is attached to the workpiece pattern.

And then from the template item lead to the desired shape.

Such use of the device is similar to the use of the cutter with the bearing, but these are not limited to its ability. For example it can be used for milling panels for facades or doors.

EXAMPLE milling panels. Or you can see a picture below the door. Panels of the door were also made with the help of this device.

Also with the help of this device can be milled inscriptions or patterns. Only need to make a template to fix it on the workpiece, turn the router and hold the pin on the device pattern.

instagram viewer

Thank you for reading and... until the next publication.

I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.