Universal workbench workshop. The history of occurrence.

Question Workplace - that still puzzle... No, of course you can do cool stuff on a stool on the porch, so I was when there was a workshop. When building a house, the bench served as a board on the box.

Later I made a sawing, combined with a router and a mounting table with almost the size of a sheet of plywood. Placing sawing and router on the same table often causes inconvenience - it was something clean to handle the details, and then do setting again.

Overall it was not bad, a lot of things done on this equipment. True, taking into account the small area of ​​the studio constantly have to play tag - remember this game with movement squares. So I had to, then ushers Saw the mounting, the otodvinesh, then reversed, then the wall, the wall ...

Strongly tired these movements and I thought to do something compact, versatile, everything to be close at hand and you can do different operations simultaneously.

As a result of much deliberation and study of the project on the computer to get a universal workbench.

Modular workplace with massive stable base. Separate sawing unit with conventional hand-held circular saw inside and module with a router.

conveyers module made so that the rip fence can be easily removed and put on either side of the saw. Circular saw itself can be raised and lowered and more turning angle. Ie regular features preserved.

Inside the area for the saw is mounted via sliding plates. With this mount the saw can quickly pull out and use in manual mode. Replacing takes half a minute.

Also parallel to the disk saws made guide profiles that can be used for different devices.

A milling unit with adjustable abutment is made by cutter different sizes.

Modules can be installed with the base end and from the side, thereby changing the area and configuration of the working surface.

At the base are made niches in which it is convenient to put the tools that work for it to be always at hand.

Also at the base are made yews to capture the details in the processing. Tisza simple - the center pin 16 mm from the sides and from her two guides.

Clamping parts can not only tisah, but also on the table. For this purpose, the stops, which are inserted into the holes of the table and yews.

Inside the base there is a place where you can store the tool, different screws, dowels and screws.

More this bench can be viewed on video.

For over three years I have been using this workstation and me in it are satisfied. To better understand - the size 150h75 cm base. height of 83 cm (almost as kitchen worktops). When the prescribed unit length from the end turns workbench 210 cm., And when the two modules are fitted with a long base side, the working surface is obtained 150h135 cm.

In general, compact and with great potential.

SRAs are also other material on a channel:

Homemade filler router. Device.

What tools are needed in the home workshop. Personal opinion.

Organizer "Wheel of Fortune" on a jig machine.

Share your publication in social networks. Subscribe to the channel. Put huskies and write comments. I will be glad to communicate.

Alexander.