Frame paneling. Error.

I think it makes sense to specify a period that was an idea how long it takes the different stages of construction.

Yet remember, this is the story of the construction is before the appearance of the history of my home carpentry workshop.

So, about the foundation, I wrote that gave him two weeks before you start to put the frame.

Making the frame I began May 28 and June 6, he was ready. That is just over a week.

Immediately I began to make the outer skin. Rail and took a third-rate or because of this, then the producer to do so, but the connection came very tight. Literally had to hammer a spike into the groove.

At that time, the best solution seemed to cobble together rail with a small bar to the side of the slot. And here I deliberately made a mistake: nailed to the frame rail groove upwards, which is wrong. I went to this because along the longest wall was planning to do the canopy and on the other side of the roof was planned with a sufficiently large canopy and the wall is well protected from the rain.

At the beginning of the skin, I immediately decided to paint the rail. I apply for this acrylic paint for exterior use. Initially, I nailed and painted several series, code lifted skin above his height, I realized that it is not very convenient. Therefore, in the future, I cut to size with a dozen rods, painted them at the bottom, and then nailed. This proved to be more effective. While acrylic lacquer dries up, and it is literally half an hour, I managed to cut the next batch of strips.

There was another unforgettable moment. Each rail I nailed on the edges and in the middle was limited to a couple of nails in each of the fifth in a series of rail. And then one night took a little rain, the wall does not shut down and naturally boggy. And where the slats were not nailed down in the middle of their arched and turned like a barrel. So later I nailed each rail in each rack that is 60 cm nail.

Because in the process of construction, I made a small video clips in various stages of construction, I propose to see video on the topic of the article.

Continued in the next publication.

Alexander.