Preparing to being trafficked aerocrete. As I struggled with the winter and narrow roads.

Oh, how good, when your site is in the middle of the city, with broad, paved roads, which are regularly cleaned in winter ...

But this is not my option.

I'm just the opposite. Land in CHT - this is not an ideal choice for a carefree life, because a lot of that has to decide for himself and for his money.

the main obstacles to make aerated to their site without problems, they were:

1. Narrow roads and most importantly, tight corners.

2. Unpeeled from the road of snow. Well, at least badly peeled and cut directly in front of my site, not shelled at all.

Since I carry the unit were not "gazelki" And on "Maze" with a trailer, then it was necessary to prepare thoroughly.

Clean it was necessary all the way to be sure exactly what the machine will travel. It is better to do extra workThan to run and solve the problems.

To do this, I hired an excavator.

Honestly, I thought he was all done very quickly and easily. But when the snow is not cleaned almost all winter, and need to clean up the layer to the ground, the process has been delayed for a long time.

After four hours of the excavator, the road was clean and almost flat, but I could not do anything with narrow and steep turns.

Long car with a trailer would not be able to drive here.

There was only one option - to deliver vsepo - parts, ie overload either by crane or crane use.

Of course this complicates and delays the process. But there was nothing.

I chose the option with the manipulator.

In my opinion, the hardest part was coordinate the delivery time gazabetona and manipulator arrival so that it will take less time and, accordingly, was less than the cost to it all.

But all can not foresee in advanceAll had to be adjusted during the process.

But this need to tell apart, because there were a lot of little things, knowing about that, you can avoid some of the problems ...

Be sure to subscribe to the channel! The most interesting thing to come.