Detailed instructions for the production of cheap septic tank of cubic containers with their own hands
Reasonable economy - channel fad Build-built!
IN today's manual will tell you about the arrangement of the septic tank of cubic containers with your hands, which will cost you no more than 10 thousand rubles, and in time it will take 2-3 days.
InSettings cubic containers as a septic tank, I'll show the example of wastewater from the kitchen. Construction of individual sewage from the kitchen makes sense, because in the case of food waste clogging the general sewer toilet, you lose the possibility to use the toilet.
ANDso we deduce from the house sewer pipe in the insulation - this is the first stage of preparation of a septic tank.
Second phase - circle mark up on the surface of cubic containers at the future site of the inlet grinder and cut a first part of a circle.
The third stage - via jigsaw Scrollsaw circular opening on the intended line. This will include a pipe.
The fourth stage - put to a tee hole for the ingress node septic tank.
fifth - Vaseline treat sanitary sewage pipe rubber seals.
sixth - Use of the silicone sealant is glued in the pipe wall cubic containers.
seventh - Set up the drain pipe for the field into the discharge pipe aeration septic
Eighth * D - such a design is used when there is no transition from 100 to 50 mm.
The ninth step - connection of two cubic containers must be rigid. A good solution would be to connect the two tanks through valves.
The tenth step - sewage and gray water is best to divide: so long as the water will settle in the septic tank, and the action of surfactants is reduced.
Important!
septic tank walls Warming of rot-made sheets of insulation - foam or polystyrene foam.
On top of a septic tank also need to warm and lightly sprinkle the ground.
Derive vent pipe outwardly. Septic tank of cubic containers cost up to 10 000 rubles ready!