How to Repair a mosquito frame for plastic windows for a few minutes?

A week ago, when the weather outside was very warm and sunny, I decided to put in the kitchen and in the room mosquito plastic frame. As a result, accidentally dropped one of them from the fifth floor to the asphalt. The result of this fall you can see in the photo above.

Long thought, as it is more reliable to repair and came to my mind one thought.

First, it was necessary to align the frame and put in place a sealing rubber.

Now it was necessary to seal plastic substrate itself and for this I have decided to use a regular plastic card. In my case, it's the storage card of a network of grocery stores.

Next I bought a tube of glue a second, it was more than enough for repair. Of the card cut two strips. Their length was 7 centimeters, and a width equal to the width of the plastic frame, i.e. 2 centimeters.

Next, I stuck to the plastic strip joints plastic frame on both sides. The effect is not long in coming. The frame is securely held and I think that's enough of the repair for a long time.

The fact that the plastic with plastic very hard to set, especially if you use high-quality super glue.

In the corner of the grid itself also moved. It had adhered to the sealing rubber.

Repair mosquito frames taken just a few minutes. I hope this method will be useful in the future.

Do not forget to subscribe and Like. You will help to support the channel. Thanks for attention.