How to analyze the quality of water from the well?
We - what we drink, I read a popular advertising, and really: water quality has a direct impact on our health and well-being. Since the summer arrays across the Russian central water supply with drinking water is usually not (is perhaps that in Mosk.oblasti), the full responsibility for the quality of the water will have to take over.
Getting ahead of myself, let's say that the most common problem of suburban water sources - high iron content. How to normalize the composition of the water, we will explain in a separate article, but here let's talk about the first step - the water analysis.
Ideally, the chemical analysis of water had to be more to purchase suburban areaBut to provide all possible: after all, and so you were looking for a summer residence, in spite of the location, site configuration, removal from the house, the presence of the store, etc. Learn about the water in advance was just the once, and come to the aid of a laboratory study water.
Council: To select competent experts for analysis of water, pay attention to:
- the term "life" of the organization - at least 5-6 years;
- own laboratory equipment;
- possession of a license.
Having defined the laboratory in which you are lucky the water sample must be the sample was properly take. Just pump a liter of water from the well is not enough!
If you take a sample novoproburennoy well, then Wait 2-3 weeks after the start of use. During this time, will settle all the pollution, which appeared in the water in the drilling process.
Council: for the abstraction of water is better to take the dishes in the laboratory - where it is treated with preservatives that do not allow changes in the composition of water in transit. Capacitance depends on the purity of water quality analysis
If you decide to use their dishes, remember the following:
- hands should be kept clean at all stages of water extraction;
- containers - should have a capacity of 1.5-2 liters, and have no odor;
- the fence need to rinse the container;
- bleed hole 5 minutes to a water intake;
- fill the container a thin stream over the wall;
- Specify the time and date of sampling;
- conveying water to give time to the laboratory can not be more than 2 hours;
Knowing these rules, in the laboratory, you will get the most accurate results and competent recommendations to eliminate unnecessary substances contained in the water.