How to clean the hole and extend her life?

Sorry, but the eternal well not happen, and sooner or later your water source dries up. However, we are able to extend his life, and in this article we will talk about self-cleaning methods well.

But start with the basic, fundamental tips for a well operation:
1. when drilling - watch casing tightness and integrity of the filter.
2. after drilling immediately rinse well before the advent of clean water
3. Protect from wellbore penetrating rain water or mud, setting caisson headroom.
4. Do not use the vibration pump!
5. Use the well regularly, optimally from the well to pump at least 50-70 liters per day, at least.

As well as clean?

1. Shake vibration water pump.
"Vibratsionnik" can not be used for continuous extraction of water, but it is quite useful for cleaning the sand from the well. It is important to lower the pump almost to the bottom.

2. Rinse the pump with the well surface.
Take a capacity equal to the volume of the volume of your pipe in the well, and start washing in a closed loop between the well and tank. It is useful to add a phosphoric acid solution.

3. The well is deeper than 50 meters better to wash two vibrating pumps arranged one above the other.