Washing machine jumped and vibrated. The problem was in elementary.

Last year, the family council decided to buy a country house on a modern washing machine. Prior to that, for many years I served as a Soviet model of hand, but unfortunately it has failed engine - burned.

Purchased in a specialty store is the budget option stiralki with a gun for 13,000 rubles. For an additional price of 3500 rubles and ordered delivery of connectivity.

We delivered and hooked up the next day. On the first day of operation of the machine during operation to vibrate, and when spinning at high speed and did a little bouncing.

At first I thought that she was not exactly worth it. Check the setting of the legs - they are a perfect fit with the floor. This possible cause immediately disappeared. Then he decided to measure the deflection using a spirit level. He showed that the unit is level, without bias.

Then it was one - to call on the guarantee of the master for the diagnosis, since the problem could hide the original factory status. However, this option was dropped after the specialist soon.

The problem turned out to be in the elementary. Those people who brought and installed the machine, simply forgot to remove from the back wall, the so-called transport bolts, which, when the carriage is fixed stiralki tank and prevent the internal components in contact with each other moving.

Master also said that further operation of the machine with fixed bolts could cause serious consequences up to the failure of the bearings and motor.

Essentially you need to unscrew the bolts immediately prior to installation, store employees what unfortunately did not deign to do.

Incidentally transit bolts after removal should not be disposed. The next time the carriage unit, be sure screw them back, so as not to cause the internal components of the mechanical damage.

Subscribe to the channel, put Like and do not miss the following publications from the repair wizard. Thanks for attention!