We cut the line from a plastic bottle
A little earlier wrote about it, you cut the bottle in the tape as simple as possible ways and means. Continuing the theme I want to check how thin ribbon can be obtainedUsing all the same artless notion that the last time issued braid 4mm.
Shire my miracle tape cut is not difficult, but in terms of reducing the width - it is also necessary to check. So check!
Using the same device as before, just make an incision in the plastic even higher to the point of inflection to the arch between the blade and bent plastic was the minimum distance. According to the plan rim should get no more than 2 mm in the waist. The case has gone and within a few seconds on the table more than a meter of a new sample of the tape.
After measuring ruler it was found that its thickness is 1.8-2 mm. But this is not the end, and now try to make the tape more thinner, by type of fishing close to the fishing line.
For this He flexed his new album and he made it a single slot right next to the place of bending. Again, I take the rest of the same bottle and continue to experiment. After several failures and breaks a bit changed angle of the blade in relation to the plate and the band is still gone, and quickly and confidently. Again, I measure the width and see that it is now of 1 mm.
On the strength of such tapes rather not weak, several kilograms of fish exactly stand. Another tried to thin, the other bottle, cut and there is plastic with a similar width of the tape proved to be less durable, so a bottle of bottle - discord. In short, more and select the bottle stands.
A further matter of technique. Cut until you get bored. On one large bottle of fine ribbons tens of meters it turns out, I think m to 40 m or more even. Despite the simplicity of the torch, a successful experiment. So there is no need to invent something else, is to get the hand and enjoy.
Evaluate material andsign upCanal.
ANDit is interesting:
How this thing cut tape from a plastic bottle? show
Super-simple butylkorez. It is easy to cut PET bottle in a tape
Stuck and puffed punch. Repairs