Custom finger joints repair broken chairs

Falling apart favorite chair causes sadness, as used to them, and of replacing and think no thought - seemed to him to live forever. But I hasten to assure you, that even if it spikes completely shattered in half, to correct the situation realistically, and not just knocking him in haste, and returned full functionality.

Proposed the following method can be repaired chairs, stools, tables, and of the remaining household items that are finger-jointed.

Screws, bolts and ties for repair in this case is not useful, But a hacksaw with fine teeth - just right. But before you need it, dismantle the chair in all places frayed connections.

In my example, I sold out immediately 5 spikes, so I had to act quickly. Also out of the grooves we remove all the crumbling debris.

To business

ATTENTION! In all of the slots emitted spikes hacksaw I do longitudinal propyl middle, at the. Suffice it to saw spikes on the 2/3 height.

Fine teeth saw dense wood saws slowly, so you need to be patient.

And after the completion of the operation still have to search in the house of some wood chips for the production of mini-wedges.

Among those caught several options focused on the usual Chinese bamboo clothespinWhich has split into small wedges. The height of the wedge should not be greater than the depth of cut, and the thickness of slightly greater than its width. I prepare everything at once and go to look for wedges PVA glue.

Wedges in the cuts do not need to drive, but only slightly to drown, so as not to get lost and miss the mark worktops with glue. Along the wedge nanoshu PVA on both sides.

It remains the most important thing - to get a thorn in the groove and beat him to stop, so that he He went the full depth and inserted a sliver went in his tongue and a good rasklinila. In this position, the compound should hold for about a day, until the glue dries. Although the degree and without adhesive compound has high reliability.

At the same chair, but in other compounds, I used not only solid wedges, but also piecesAnd I think the result will be no different. Main good knock down and to allow sufficient time for drying.

Do you realize the whole thing in the inner samorasklinivanii spike, what better to choose a wedge of wood tightly to keep it from crumbling in on even smaller splinter. At this until all friends. I await your conclusions and thoughts.

And in addition the material straight from the tin repair stools.

Evaluate material andsign upCanal.

ANDit is interesting:

Backdraft: eliminates odors from neighboring floors vents

Cutting mini-nozzle on the drill from a broken disc grinders

How to tighten and release the drill bit in the drill chuck without clamping key