Rented magnet speaker for 5 minutes. Goal-tselohonek

No, friends with a hammer to beat on the dynamics of the magnet and we will not, unless absolutely slightly and gently. But it later. How many magnets smashed with a hammer in his time, but now I do everything easier, faster and without any damage. The basic operation here - temperature heating. As I walk up to it?

Before the beginning of the case study and prepare several tools:

• Building a hairdryer.
• Chisel.
• Hammer.

It is possible and without even a hair dryer do, then warm the speaker will have on the gas stove and the burner.

Key actions

Before the main action will remove the remnants of a paper membrane dynamics, not to smoldering from a hair dryer. Circular motion warm up the upper part of the speaker, but without fanaticism. Blush should not iron, 60-80 degrees is enough. If the water sizzles on iron - more precisely it is not necessary.

Overheating magnet loses its properties, so it is important not to overdo it.

Now under the heated metal circle slowly and not strongly egged chisel, which undermines the plate and it is completely separated. Just bear in mind that the speaker hot and cook for a suitable place.

The metal cools quickly and there is not the order of 2-3 minutes to remove the top.

Do not delay, I turn the speaker on the back, and is now on the inside warms up the body as well as the top - 1-1.5 minutes. Again, I rely on something metallic that it primagnitilsya and stood better and try to drive a chisel between the body and the magnet. Order the magnet moved.

Next time I will try even without a chisel, but just try to cut the softened adhesive thin-bladed knife construction.

And while the magnet is still warm quickly stripped from him a chisel paste. It turns out fine, but it is a trifle. The main magnet is intact. If even a little glue left, we can clean off after his scrape with sandpaper or something sharp.

All about everything has gone about 5 minutes. Note, if the magnet is still not removed, then the adhesive is not yet warmed up properly, and it is necessary to repeat the operation.

After receiving the magnet, he opened the field for other experiments, which will write.

Evaluate material andsign upCanal.

ANDit is interesting:

Construction did not go. And all in one day

What exactly needs to be done before the ceiling putty

Building up sagging border flowerbeds solution