How to remove the remains of long-standing foam. And not have to wait!

after several household "discoveries" using a solution of dimexide continued its testing for dissolution foam. I think this point is interesting not only often climb into the foam for men, but also women who have that same foam tear off from anything.

Perhaps earlier on the channel you've already read, I experimented with Dimexidum, deducing spots of superglue and removing varnishAnd now I decided to try it, how it behaves with long ago dried with foam.

The case of the more suitable stood out. Remembered that the door Lutkov set 5-6 years ago, it has remained the foam, which was originally smeared, and after drying, not how it is eliminated.

Since smew with PVC film to cover not spoil after several unsuccessful attempts to remove the foam has decided not to touch more, and place the bottom is not too noticeable.

I took a piece of cloth, even the gloves are not dressed, poured a little of the solution and gently rubbed on Lutkov. I thought I have to wait

15-30 min or more, as in previous cases, but was surprised when foam is washed off immediately! It seemed that the shot does not foam, but simply wiping some usual spot.

Itself PVC film on Lutkov not how things have changed, however after 5 minutes, I carefully wiped all her several times with a clean cloth.

I would also like to see how this solution removes dried clothes with foamBut in the future. In the meantime, I can say that with hard surfaces polyurethane foam is removed properly, so try if you have to.

Evaluate material andsign upCanal.

And it is interesting:

A durable connection without soldering wires

Accidentally I learned how to remove the paint from the tree, and even odorless. sharing

3 a method for replacing a mosquito net pens. Simply nowhere!