As zashpatlevat seams in the skin of drywall

Plaster wall covering - it is quite reliable and steady at the same time the basis for further finishing. However, between the plasterboard panels are seams without addressing that receive the decoration will still fail. Sutures require mandatory Shpatlevanie. How does such a procedure? It can be divided into several areas.

1. Preparation of gypsum sheathing

In the preparatory step is to prepare the working surface quality. First of all check that the cap screws along the seam does not protrude. See if they are in good condition, you can use the spatula. They pass through the fastener location. If in some places spatula clings, it is necessary to deepen the screw into the interior drywall stronger.

Also in the preparatory phase need to clean themselves seams, to rid them of any remaining contaminants. After cleansing operation portion primed and waiting for the primer to dry.

2. Applying putty on joints

Here the nature of the work depends on how well was installed drywall. If before the owner has fulfilled all the events correctly, the height differences between panels should not be. Then it suffices to take a bit of putty, apply it on the seam, push, and then smooth over the surface.

Unfortunately, this is not always possible. There are cases where gypsum panel at the seams a little apart. To further defect is not worsened, the seam will need further reinforced. This requires a strip of serpyanku mesh width of 10 cm. It is placed on the seam, deepening, and only then shpatljujut. The problem is that even with very intensive Shpatlevanie then stitches will still be visible. But another option in this case is not there.

3. Elimination of possible defects

Get absolutely smooth surface after shpatlevanija possible if also very good overwrite all seams with fine sandpaper. Ideally, putty completely should not act. As a result, before finishing work owner will only primed the entire plasterboard lining and wait for it to dry.

If these works are properly carried out in the future will be applied to the drywall paint composition, wallpaper and other decorative materials easily. Naturally, have to give up only by ceramic tiles and other products, has an impressive weight.