How to mount the floorboard to the floor on their own

Provide floor coverings with high wear resistance, durability and excellent appearance is obtained using modern floorboard. Unlike the classic parquet, it is particularly difficult installation technology is no different. If the owner will follow the advice of professionals, he must own tuck the material quality.

1. floor preparation for installation of the board

This flooring can not be laid on unreliable rough or uneven ground. Therefore, begin with the dismantling of the old finishing materials. You also need to remove the previously laid screed, because it is likely to be in poor condition. Then line the floors.

You can use the cement-sand mortar to ensure a level surface. But sometimes used ordinary OSB panels and similar wood-based panels. In the first case, the flooded floor screed then need to lay a substrate. For example, from the technical corks. But on the OSB panel floorboard can be placed at once.

2. Installation of the floorboard to the floor

There are two technologies of laying flooring. Thus, the floorboard placed adhesive or floating method. The first is now almost does not apply. The second assumes that the board simply aligned in rows along one wall. Before installation of the first row to install the spacer wedges 5-10 mm thick. Then battened Paso-ridge system, until there is a whole series.

From the second row have to provide bandaging of seams between the panels. Therefore, the first plank is cut in half, and only then mount it to the previous row. Laying the last row, we have usually cut along the panel also. To this work was as simple as possible, it is necessary to prepare an electric jigsaw. Also, they can use when you need to put the board around heating pipes or other utilities.

3. Decorative trim wood flooring

Parquet board, unlike the laminate in the initial state contains no additional protective layer. Therefore, it is necessary to put on their own. But first the wood very well primed, because it is quite porous and quickly pulls moisture from the paint formulations. Next is applied to the board paint or varnish depending on the wishes of the owner.

This technology, in fact, is not associated with any special difficulties. But to implement it correctly, the owner will provide the perfect flooring.