Nozzle hammer with additional fixing wedge

Fly with a hammer handle ever-no one wants to endure and will not be, and I do not want to, so I suggest a simple way to enhance its fixation.

Start will build on the classical scheme, and then add a useful touch, through which will not fall any wedge or lever.

So, collect ...

First make propyl in the upper part of the handle by a wedge. The depth of cut is small 1.5 cm -2, and then go down under the force of impact. Then to sit down on the handle hammer blows to the lower end of its other hammer or something else.

Conventional manner, clogging, are driving a wedge into the cut. I tried to beat him to drown in the handle of the whole, so that wedging is necessary. And then proceed to the very cunning.

To begin taking Drills for metal 3mm and set a drill, drill a hole more laterally on the hammer.

Hole is not through, though it is possible and through. Drill hammer on top of a pen, a wedge and a little bit the other side under the hammer handle. It remains to fix somehow.

instagram viewer

For fixing use a short screw with a threaded hole slightly larger diameter and an increased cap. Screws has been long and I cut it.

Screwing screw screwdriver at a slow speed and with a decent effort. If a screw is weak, it will break halfway and nothing happens, except that then it will be possible to drill.

It turned out this way once (6 photos). Chamfer do not become under the bonnet, but could be. I think that for the pilot sample, and so good. In general, it is precisely the trick. I think the hammer will now be more reliable.