Useful content

Cheaper nowhere: simple column of water in the country

click fraud protection
Picture 1.
Picture 1.

Superprojects supporters here will not be interesting, because the goal in this case is different - to urgently provide water to a new cottage on the available budget the most tapping method. For the manufacture of columns used polypropylene pipes (PP) solder with the expectation that they stand for a maximum of two years.

Picture 2.
Picture 2.

In the not so voluminous purchases it had to include the following set:

  1. Pipe PP 20mm - 3 m;
  2. Crane Ball Soldering - 2 pcs;
  3. Area 90 degrees - 2 pieces;
  4. Area 45 degrees - 1 unit;
  5. Barrel (adapter) from 3/4 to 1/2 with internal threads;
  6. Coupling with external thread (MPR) 20 mm for soldering.
  7. Bit FUM-sealing tape.
PP cranes Solder It can be taken with iron or brass internals, but the second option is almost twice as expensive. At this point everything is decided on the situation.

On the black member of the pipe hole stood clinch nut fitting on 3/4 inch (photo 2), From which it was mounted shift to 1/2 inch and the whole column. The first valve is soldered on the bottom of the pit in case of failure of the upper crane that Gusakov, exactly the same. Water meter, by the way, is set in a place of connection with the pipe in the well on the other side of the street.

instagram viewer

Picture 4.
Picture 4.

Above-ground portion is the classical way: angle 90 c soldered PP valve angle 45 c.. for a more comfortable angle of the spout. After soldering all the parts required to ensure the stability columns for which the bottom portion under the horizontal threads were planted bricks and installed a cable stretching toward the center, and the top for stability used with steel wire loop. Later, the construction will increase with boards flooring.

Photo 5.
Photo 5.

It must be said that the pipes of 20 mm are not as stringent as it should, therefore does not provide a complete column of sustainability and require the use of any struts or stretch marks. But as a temporary measure, this design is quite good and up to 5 years to serve, even in this case, a term of it is not required.

Evaluate material andsign upCanal.

ANDit is interesting:

Mysterious broads! And then it burned down an extension cord?
Rough putty slope. What to consider
Mole-shovel. strong impression
An effective method to get rid of the yellowed plastic.

An effective method to get rid of the yellowed plastic.

Today, plastic is so widespread in everyday life, which is quite firmly established in the life ...

Read More

The bed, which is not, or 5 models of beds, "invisible" for small apartments

The bed, which is not, or 5 models of beds, "invisible" for small apartments

Good afternoon dear friends!"Find me if you can!" So can safely say only Bed-transformer. Smart f...

Read More

Building a brick warehouse annexe: fotoinstruktsiya

Building a brick warehouse annexe: fotoinstruktsiya

User portal tells how he self-built barn for storing boards, ladders, garden wheelbarrows and sac...

Read More

Instagram story viewer