Installation of PVC windows. 7 Put the sill 100 years
Installation of plastic window sills It was conducted with a constant horizon level control in the longitudinal and transverse planes. This ensures visual and functional advantages, which we usually give little thought until they are.
Punt the slopes extra bricks did not, because it is much easier to prune itself under the sill of the opening profile.
Cutting waste is not lost, because they were used as a lining under canvas with wooden cubes. The height 4 of the substrates was adjusted according to the height a particular point. Eventually they became in one plane, there is no gap between the sill and frame.
When there is a gap of a window always shows through, which requires additional sealing.
The window sill need to make up a complete stop in the mounting rail, that under the frame and align. To do this, use the spacers from scrap lumber that is recorded in the earlier parts of the cut slopes. That there is no gap between the frame and sill, when you install it must be a bit of bounce and strut top is compensated.
Exposed sill remains gently blow out the foam. It can be a bit zapenit over it thoroughly and fill the space beneath it, but without fanaticism, as in the case of excess plastic will arc.
To compensate for the fresh foam likely put pressure on the windowsill something tyazhelenkoe - hammer, a pair of bricks, etc., but not to overdo it.
Under sill flush with the wall better not zapenivat and leave 2-3 cm of plaster. Plaster will create a kind of focus and increase the rigidity of the structure, though ready to step on the window sill, even when this condition better not.
Even if the foam from the bottom in the end would be too much, cut part of it out of it is not difficult.
The final position of the sill will take only after the completion of plaster. Prior to this, in some way, you can make an adjustment of its position. Now we will turn the tide.
Evaluate material andsign upCanal.
ANDit is interesting:
Installation of PVC windows. 6 and zapenivaem frame Fasten
Installation of PVC windows. №5 Repairs bridge over an opening
Installation of PVC windows. Remove flap № 2