Useful content

How do I know this disk for a saw or grinder?

click fraud protection
Picture 1.
Picture 1.

Spices, all here! It is required to bring clarity. Who reads the blog constantly must remember not so long ago a post on the topic "Rapid method of removing rust... "Which for some reason I did not focus more on the process and on saw blade for wood 180 mmFrom which it was removed. Reading the comments already he began to doubt that this disc for angle grindersAlthough it is for the Bulgarians it and bought it. Next briefly what is known about him.

Picture 2.
Picture 2.

Of marking and the inscriptions were only here these embossed letters and numbers, the rest is erased, and sorzhavelo oblezlo with irzhoy and citric acid during processing. these signs are not enough about what they say, so go ahead.

Picture 3.
Picture 3.

And here Bore diameter 22 mm- this is a serious argument. It corresponds exactly to the flange of the Bulgarian and ideally it sits. As far as I know, Bore saw blades for handsaws has a larger or smaller size, so lean that the drive is still for angle grinders.

I can not exclude that there is still such a standard planting hole and to drink, and do not yet know about it. If there is such write.
instagram viewer
Picture 4.
Picture 4.

If we compare outside diameter mysterious disc diameter 180th disc for concrete (4 photos)They are exactly the same. So again, all in favor of that "Nibbler" is made under the grinder.

I would also add that the saw blade 21 tooth, 3 small longitudinal cutting and carbide-tipped.
Photo 5.
Photo 5.

It remains only to look at the thickness of the disc. As can be seen on shot 5 is about 1.5 mm. At this thickness, the metal disk is heated rather quickly, and when working with wood begins to burn. So smoke, you know, out of it comes Nemer.

I agree with everyone,who consider such a dangerous drive when used on angle grinders. I told them only thin slats and bars are cut and it is very rare.

The question arises: If the drive for the Bulgarians, the manufacturer could really allow such a dangerous thing to hit the market? What do you think? And do you see any arguments showing that the product is still for hand circular saw?

Evaluate material andsign upCanal.

ANDit is interesting:

The simplest clamp for 5-10 minutes. five ways
How to unscrew the nut without a key. We need a couple of corners
Without cut tiles Tile. simple device

All neighbors will envy your Roses. Must-do with bushes in September to get Gorgeous flowers

September has arrived - the time to take care of the roses. The events that I hold every year he...

Read More

Brick fence posts (not only for the rich): imitation or analogue for 4 rubles. per brick

Brick fence posts (not only for the rich): imitation or analogue for 4 rubles. per brick

The fence serves us as a protection against the penetration of unauthorized persons, fencing our ...

Read More

Hozblok for 100 years: beautiful, functional, and, most importantly, with your own hands!

Hozblok for 100 years: beautiful, functional, and, most importantly, with your own hands!

Powered by FORUMHOUSEHozblok - simply speaking - a modernized barn. The building is useful, since...

Read More

Instagram story viewer