How to drill the tile so that it is not cracked?
Tiles made of tiles is not durable finishing material, so if you want to drill it, you need to be very careful and know a few small life hacking that will save it from cracks and chips.
First of all you need to choose the appropriate drill for drilling tiles and preferably with a diamond substrate. Such drill bits have an unusual shape of a kind of an arrowhead. Photos of this drill can see below.
Now that we have the correct drill bit, you need to set up our drill, but rather to set the correct speed to work with tiles. Recommended speed in this case are 800 -900, less is better and less chance of damage to the tiles.
Drilling tiles very uncomfortable, because the drill bit and wants to slip off the hole in the side seats. To avoid this, there is one little trick. Take, cut off a small piece of masking tape and paste it on the tiles in place of drilling. In this case, the drill will not slip on the surface.
Also, when drilling is necessary to keep the tool smoothly and in any case it does not strongly press for obvious reasons. It is mandatory to time watered with water and place the drill hole from time to time. This can be done using the usual homemade sikalki from a plastic bottle. Otherwise it may happen overrun our material.
All of the above rules together, to help you efficiently and without loss drill tile for a few minutes without any problems. Importantly do not forget them, and make yourself a better memo.
Do not forget to subscribe to our channel-front of a lot of interesting material. Thank you for attention.