Now the key to the drill is not to lose 100%. A small trick

More than once a long time to look the key to the drill chuck, So I had to include fantasy to find a way to not anyhow always keep the key at hand, and even to use it comfortably. And so, Now even forget it somewhere accidentally impossibleBecause it is securely and safely attached to the device, as further details.

Previously simply primatyval key to the power supply wire tape closer to the fork (Photo 2)But with time on the part of the bend tightening drill core wire above or below the key can break, so it's best to find a way more reliable.

The problem is solved so. First take all the same drill, charge it to the normal drill for metal (I have a 3.5 mm) And below the key head, closer to the handle, a through hole is drilled.

Place the drilling is not chosen by chance: At firstThis thickened part of the key, Secondly, to use so it will be most convenient, what else have thoughts below.

When the hole is ready, I go seek some smallsteel ring harder. You can remove the keys, key chains, toys, most importantly, that it is spreading. It now remains

key means to fasten the ring to the wire drills.

Ring picked up so that its diameter missed key and wire and provided not too free running key. This personal question, but I was more convenient when the key does not run too fast here and there, but slightly adheres.

It remains to test the idea on ergonomics that when manual labor is important. As it turned out to key remarkably convenient, as when tightening and loosening ring holder gets between your fingers and stands upright without putting pressure on them and absolutely without interfering.

Unlike with the method primatyvaniem tape in this embodiment break the wire when installing drill will not workAs with every new operation key on the wire at least a little biased in some way and it does not have to bend constantly in one place.

I this way quilting key seems to be simple, reliable and convenient. And you?

Evaluate material andsign upCanal.

ANDit is interesting:

Custom finger joints repair broken chairs

Backdraft: eliminates odors from neighboring floors vents

Cutting mini-nozzle on the drill from a broken disc grinders