How to put linoleum on a substrate of chipboard

To linoleum was able to put on the floor efficiently, it is necessary to prepare a reliable and smooth rough basis. To ensure such can be used chipboard. How to deal with it properly, so that later served as a floor covering without complaints? Below is a technology linoleum flooring chipboard.

1. Preparation of particle board

First you need to remove the old facecoat and possibly present underneath screed to floor level is not raised too high. DSP itself should also be properly prepared. For this purpose, it is required to handle antiseptic composition. Otherwise hereinafter fungus may appear on the panels.

Can be laid and the whole plate, but it is better to cut each item at least in half. Otherwise, large slabs can eventually crack from the stress.

2. Laying chipboard on the floor slab

To fix the panels using the adhesive composition, in many respects, and for this reason, particle board had to handle an antiseptic. Have a panel, be sure vrazbezhku. Only this method allows us to avoid intersecting joints.

When the plates are fixed on the rough surface, it is necessary to make sure that they all lie in the same plane. If there are irregularities, they can be eliminated by treating such a substrate sander.

The problem is the presence of joints between adjacent boards. When they are too noticeable, linoleum these problem areas in the future may be deformed. Avoid deformation happens if put into the gaps putty for wood. At the same time, its smooth and well rub clean cloth.

3. Linoleum flooring dry screed

Now put linoleum on the prepared screed succeed without problems. It is first necessary to spread out on the rough surface and well spread. When the linoleum will not wave his or merely pressed against the perimeter of the skirting, or glued to the unfinished base, although this is not necessary. You also need to cut off the excess material, and even leave a small gap between the sheets of linoleum and walls. In the future, these areas will be covered by baseboards.

The described technology provides a robust floors without too serious effort and money expenditures. And serve flooring laid correctly, many years. Repair it is not required. One needs only to arrange a complete withdrawal.