Painting the walls at once. doable

Someone might say that a bad roller caught or plaster of a different color, so I had to paint the 2-3-4 times, and yet there is a version that the wall absorbs the bad - all of this is true, but from experience I would say that a lot of things depends on harboring capacity ink used.

If harbored ability vodoemulsionku good, the result will please even the professional and novice, equipment ownership and roller brush which is still being formed.

In terms of interior paint, I made my choice 10 years ago and it is still relevant today - buy Polifarb for outdoor use. And if I allow you to choose the material, paint the walls inside Only this brand of paint. If the paint is applied properly, rinse or wipe it with a cloth / sponge and, if desired, you can not. But this is not even about that.

On the second picture - window slope before and after the application of only one layer of paint. Yes, the slope has already been painted, but it stains and large expressive, so to "hide" them is not easy. Paint mentioned here does the job in one go.

Roll the roller in one place stands a few times with a pause - about a minute or two and let the surface dry. More to it, I did not return. Single pass enough.

If you read an article on the channel of "capturing" the apartment mold theyou think it will be interesting to see the result of a single layer of repainting the walls in the bathroom. At first, it looked like this:

But after a series of operations, the situation was corrected. Mold was washed off with water and detergent, and then treated with antifungals wall for a long time to dry, and finally repainting. Again, only a single layer, then observe this outcome:

Small parts may be hard to discern. All I will say that some of the defects on the basis of repainting was that after this last, as picture 3It is not surprising, but the error is not related to the paint, and more with the state of the walls and the same will soon be eliminated.

The other side of the aforementioned kitchen slope fungus also hooked. Again, look at the difference between the surface and the tainted painted only once in the same "Polyfarb".

All this to ensure that normal supplies are, though, as for me, not enough of them. Since you only share my observations and nowhere call. Pick up a decent paint - the whole affair, he caught more than once, but the ability of the paint to harbor Polifarb considered worthy of attention.

In this regard, I can allocate more paint Mattlatex, but it did not work quite a while, so what it is now, will not say exactly.

Evaluate material andsign upCanal.

ANDit is interesting:

Easy removal of old varnish. And with furniture can

Sorry for grandfather, staged a miracle mixer. Do not fall

Insulation of the outer slope polystyrene apartment. Part 1