As a self-stick drywall on the walls

Scope of application of gypsum panels wide. This is not only practical characteristics of the material. It contributes to the popularity of simple technology attachment to the rough surface. For example, you can simply paste the drywall. What is the procedure? In some cases, it is appropriate? The key features of the process.

Under what conditions drywall paste

Immediately it should be noted that the drywall panels can be glued not always. This option is appropriate when installing drywall on a flat wall or ceiling. If irregularities initially strong, the best solution is to install on metal fasteners or frame. If irregularities are available on the ground, do not interfere.

How to prepare the surface for laying plasterboard

The preparatory phase requires first removing the previous finishing material. Only after this is applied to the base of leveling compound to compensate for the minimum elevation. Before leveling surface is treated with primer. Then the applied cement-sand mortar and allowed to dry. After drying again primed surface.

What is the composition of the adhesive used

Not every glue appropriate for fixing plasterboard panels. It must acquire a special composition which is capable to bond with each other and drywall concrete surface. If this did not help, it is necessary to use a simple adhesive mixture has a pronounced grasping qualities.

How to fix the drywall adhesive

Apply the adhesive composition and may be on the panel and the wall itself. The second option is considered to be more successful. In this case, the wall may be completely covered with adhesive. If there were some kind of recess, they do more adhesive.

Further gypsum board is pressed against the surface smooth on the whole area. Drywall need to hold at least a couple of minutes for the adhesive to have time to grab. Then proceed to the adjacent panel glueing, leaving between it and the previous gap of about 2 mm.

What to do after gluing

Adhesive strength attains approximately 12 hours. Then you need to zashpatlevat gaps that remain between the sheets. And when she putty dries, you can begin to finishing activities resulting primed trim. On the taped drywall can be painted, wallpaper and other decorative materials lungs.