How to install drywall on the sound insulation

With the help of gypsum panels will ensure smooth and reliable surface for laying finishing finishing materials. But plasterboard liner could be more practical if positioned below it and still additional soundproofing layer. Below is the installation of drywall technology on noise insulation, which is a snap to repeat their own.

1. frame assembly for drywall

To pave the layer of sound insulation under the drywall, you will need first to form a good basis. In more than 5 cm as it well be apparent to a frame construction of the bars in thickness.

When assembling the frame, first equip trim perimeter wall. Then start installing the uprights and crosspieces. At this stage you have to remember that to create a rigid plating rack frame structure can not be placed too far from each other. It suffices that the distance was only 50-60 cm.

2. acoustic system layer tab

There are many types of noise insulation materials, which can now use the owner. But, as practice shows, it is better to stay on the classic shumoizolyatora samples. For example, as such may be mentioned mineral wool. It is a material with outstanding sound absorption properties, which does not burn and breathable.

Slabs of mineral wool in laying nests, remaining between the carcass elements. They have to go to bed very tight, so as not to be a gap. If work is carried out in a room with moist air, mineral wool and will have to protect with a waterproofing or vapor barrier layer. Suitable simple polyethylene, although it is better to purchase specifically for this purpose Superdiffuzionnaya membrane.

3. Installation of drywall on the sound insulation

Fasten drywall panels to the carcass structure is simple. To do this, just need to use screws that prihvatyvayut drywall to the frame members. Between adjacent elements of the finishing leaves a gap of 2-3 mm. When the entire frame structure is hemmed plasterboard, shpatljujut intervals.

Collecting plasterboard paneling with a layer of sound insulation, the owner can proceed to its finish. If you want to improve the quality of sound insulation sheathing, drywall enough to stick on cork panels. They are also remarkably manifest themselves on the level of noise isolation.