Self varnished wooden door

Modern wooden doors have remarkable strength characteristics, provide a decent heat and sound insulation, excellent look. But they have a problem. The most serious - with intensive use wooden door relatively quickly deteriorates. To protect it from the negative factors can be carried out spraying. How to apply varnish on the door of the timber? Below is the process by point.

1. preliminaries

First leaf wooden door must be removed from its hinges. Then it is placed on a flat, solid surface, where you can safely carry out the work. On the door leaf is usually present an old finish. From it you must get rid of.

To do this, the door is cleaned metal scraper or other blunt instrument. Also definitely need sandpaper, if the canvas has some complicated and intricate designs.

2. Preliminary repair wooden door

Refined linen need to inspect. The most dangerous are fungal and crack. The fungus is also necessary to clean off, and then cover the problem areas with an antiseptic. Better and does handle this lineup the entire web. Cracks, chips and other defects shpatljujut. Suitable filler or wood, or self-prepared mixture of sawdust and glue joinery composition.

After shpatlevanija on the repaired areas are again sandpaper to smooth them out completely. The final step in the pre-repair becomes priming.

3. Processing lacquer wooden door

Lac begin to apply with cloth corners. The fact that it is the corners are the most vulnerable places. When the doors have glass or other decorative inserts, be sure to close their molar tape. Then proceed to the processing of all remaining area of ​​the web. Naturally, apply varnish roller in this case can not be, so it works the usual narrow brush.

No need to apply varnish large strokes. On the contrary - they should be short, and lacquer very well rubbed. It is applied in at least two layers. After further treated with remote sites, where the lacquer previously could not penetrate.

4. shutdown

Once the paint has dried, inspect the door again be overwritten by sandpaper place defects. Lacquered door leaf will only have to put back in the loop and proceed to further exploitation.