The movable plug sockets for your own hands

Younger helpers differ excessive curiosity, which parents need to protect themselves. Sockets - source of increased danger, therefore, show you how to make a simple mobile and inconspicuous patch, which I hope the baby will not be able to outwit.

This version of the plug-lining is best for single sockets without groundingIn other cases, it will have a little upgrade.

From what and how to do

The plug is made of plastic cover, Removed from the jar out of the cream. And any other suitable plastic, of a thickness of 1 mm. I need to cut out a circle, which is the size of the free part of the circular recess outlet - plughole.

First, cut a circle of plastic and customize it according to the size of the lid recess to the outlet.

The diameter of the plug receptacle on all new outlets around 39 mmSo cut out a circle slightly smaller - 38 mm.

Align the edges sandpaper and I do markup under the three holes on the same line: Two holes - one for forks and - a screw that keeps the cover. The distance between the centers of the two end openings 19 mm and the third - in the middle.

If the hand is not the drill holes you can simply dig up a knife or a screwdriver, which I did, and cut the burrs. This results in a ready-to-install leaky circle.

Note that the hole in the middle of a bolt in the socket diameter less extreme.

Check the item to match the size of the holes and on the first available under the arm fork, and if necessary, even to tinker with the edges.

Diameter circle cut and forks should be the same or close to it.

Well, now it is necessary to adapt the plug into the outlet, and have peace. To do this, unscrew the bolt that secures the socket cover and the same with a screw cap is screwed into the socket.

Tighten the bolt with a force necessary to set the cap turned to rotate the fork with little effort.

How does this thing, look at the video

In the operative position in the plug holes and outlet holes are aligned in the plug and socket when not in use, plug cap is rotated 90 degrees and it becomes completely safe for kids. That's all!

Evaluate material and sign upCanal.

And it is interesting:

Jammed ball valves. Close slowly

RJ45 connector replaced without special tools

Fillets glued tape, self-adhesive with trimming