Glutinous method of fastening the drywall on the walls

Panel drywall - a material that is often used in order to align the walls. Indeed, rigid sheets of drywall provides reliable surface on which you can then easily stow a variety of lining coating. For fixing plasterboard panels themselves are used, including adhesive method.

1. Preparing walls for gluing drywall

One serious problem with this method is that the very rough surface should be well prepared. Preparation requires that the walls of the old finish is removed, eliminate pollution, obscure cracks and joints between the slabs using a concrete structure. If there are irregularities, they should be eliminated. Wall plaster is applied, and after drying - primer.

2. Bonding of plasterboard panels on the wall

Desirably, the owner bought drywall sheets whose length is greater than the height of the room. Of course, with them not so easy to handle, but they form the finish without horizontal joints.

To fix plasterboard securely, you need to purchase an adhesive composition with improved grasping qualities. Glue is applied to the wall of a roller or brush (or in a grid on itself plasterboard). But the first option still easier. After applying the adhesive waiting about 10 minutes. Then proceed to the consolidation sheet.

plasterboard panel is applied to the wall, smoothed and pressed, squeezing out the excess adhesive. The pressed state drywall must be at least a minute. Excess adhesive then best removed by using a clean cloth. Pasting the next panel, leave a small gap. Its width should be only a couple of millimeters.

3. Elimination of seams between panels

The presence of seams - the most serious drawback of plasterboard lining. If they are not removed, apply a finishing material quality will not work. At least, if the paint or wallpaper. Accordingly, the seams have zashpatlevat. Their first clears, then treated soil. The gap remaining between the panels placed slightly fillings. Then rubbed it so that the boundary between the sheets remained completely hidden filler. The very structure of the building does not stand out, to leave no irregularities.

Now, when the drywall is fully entrenched, and seams were Stopper required to carry out the primer finish the whole area of ​​the gypsum sheathing. After drying, the composition can begin to finish.