Blind area of ​​the rubber crumb: seamless coverage around the house, 100% of the foundation protection

Every house needs a quality foundation and blind area. How do blind area, we have already spoken in detail. Today will explain how to make an inexpensive and simple blind area of ​​a material that will not crack or fade. What material is durable, easy to handle, does not rot and does not crumble?

Rubber crumb for seamless coverage blind area - ideal. The growing popularity of this material. Cost crumb coating - from 350 rubles. per sq. m. This price crumb rubber together with a polyurethane composition.

To impart more durable hard coating blind area, it is necessary to use crumb rubber fraction of 0 5 - 2 mm.

Polyurethane compound binds chips and makes it a monolithic, seamless. There are dyes that can be used to give color blind area.

There is a sale of the finished roll coating. Band of 0.3 m. To 3m. It is located within 800 rubles. There are a wide roll (60 cm.) Of the same length, but the value of 1600 rubles. Coil coatings are recommended more for laying on the sand-grit pad or directly on the ground.

Fill layer is not greater than 8 cm. For a sufficiently solid foundation layer thickness of 10 mm. You can apply one or more layers. Rubber crumb perfectly protects the foundation and walls from moisture and destruction. Rubber otmostka distinct looks with garden paths of the same material. Before the flooring should lay geotextile.

If the ground is soft, it is necessary to make the coating layer 2 and between the lay fiberglass mesh. The mesh must be secured after solidification of the first layer stapler.

Crumb rubber can be laid on any base. The main thing - a well-leveled and compacted.

Be sure to make a slight slope to the blind area. It is possible to make the rubber cover on the ground, gravel, grass, concrete, stone, metal, wood. If a solid foundation, the first surface is primed with a thin layer. For this purpose, mixed with the turpentine polyurethane adhesive (1: 1).

We are waiting for drying the primer composition and then preparing a rubber coating. 6 kg. crumb rubber per sq. M. The volume of glue: 1 sq. m. - 1, 7 kg.

The final composition: Crumb rubber and pigment, if necessary. If we use an organic pigment, the blind area in the sun will not burn. Mix thoroughly with a mixer and add glue in a thin stream. Be careful not to get water into the mixture. She - the accelerator for the polyurethane mixture will stiffen quickly.

Installation of enclosing elements: rubber curbs or concrete. Apply the mixture on the finished substrate. Conventional spatula or special roller for stacking roll on the rubber crumb surface. Do not push on the roller. Complete drying coating will occur after 2 days.

channel RemontDom thanks for the attention of readers and asks Like. Thanks and all the best.