Bath 20 000 with the foundation of the sleepers

Its bath on the site of a country house or villa - a dream for many. Confused by what you need to spend money, time and energy. To save money, some dare to build a sauna without the foundation of the sleepers. Today will tell how to do it and what to look for during the construction of baths.

The cheapest material for the construction of a bath - sleepers. This material is treated with creosote. New ties with the antiseptic treatment is not recommended. Unpleasant strong smell of creosote is toxic.

And if you buy a decommissioned railway sleepers, which for several years, it will be a great solution. Creosote during that time will erode. Odor and harmful substances removed the sun and rain.

In just a few days it is already possible to bathe in a bath (construction takes place in a short time). There are reinforced concrete and wooden sleepers. Both versions are suitable for the foundation of the bathhouse. The foundation can be columnar or tape. Sleepers will not harm the rodents and insects istochat.

Less sleepers: high weight (50 kg. one board), a length of 2 to 7 m.

The foundation of the sleepers will be reliable and durable (will last about 50 years). If it is possible to replace the lower row of sleepers, the foundation will last forever. The use of sleepers will save money on concrete and rebar. The cost of one sleeper b / y, we have about 300 rubles.

The foundation of their ties to the bath with his hands

Such a foundation can be made for the greenhouses. In this case, simply install the sleepers on the ground without training base.

For belt-type foundations prepared under the bath base. Dig a trench for the foundation. The depth of the perimeter should be from 60 cm. The foundation may go into the ground, to rise above the ground partially or completely. Depending on this, dig a trench.

When rolling ground to do a deep foundation and tie in several rows. When groundwater are deep sleepers can be put directly on a bed of sand and gravel.

The bottom of the first trench is filled with sand (at least 5 cm.), Then rubble fines (20 cm.). Leveled and moisturize the pillow. Then you need to carefully compacted.

Be sure to lay roofing material (make waterproofing). Stack material with overlapping (15 cm.). Waterproofing serves as additional protection against odor creosote.

Now begin laying a number of sleepers. Choose the strongest boards. Bars fastened together staples or metal pins.

Vertical sleepers join in the pre-drilled holes reinforcing bars. Put on ties and frame walls sheathed board. Then comes the roofing material, and again - the board of approximately 25 mm.

Channel RemontDom: SUBSCRIPTION. For Huskies special thanks!