Laying linoleum. Trimming around the pipes
Greetings, visitors and subscribers to the channel! Thanks for coming.
Lay a linoleum - a problem not of space, but even on the premises of the simplest geometry there is always some kind of pipe that you want to crawl and, of course, it is inconvenient for the threshold. This time is short and to the point about the first moment. And you see the article-narrative about how to trim and glue linoleum butt.
1. For cutting linoleum need to spread out around the pipe roll completely so that it took its final position, and it remains only to trim. In place of exit tube tightly presses the material to the front part of the tube and visually note the location of inflection (Photo 1). This operation is performed as accurately as possible.
2. Cut the rolled part linoleum vertical, focusing on the center of the pipe. If you make the cut more than shown in photo 2, It will be noticeable. So it is better nedorezanny little than to overdo it.
3. Now choose one of the sides of the incision slowly and gradually circumferentially pressed tightly to the linoleum floor of the exit point, cut semicircle diameter pipe. From experience I would say that at first it is better to do in a less prominent way. Then trimmed on the other side of the pipe. It now remains to straighten the cover and check what happened (Photo 3).
Equally important, the knife with which the blade is used. Hard knife with a short blade replaceable, that the picture is good in the fact that its blade is rigid, and therefore does not to spring back and will not break during the work, which is why the cut line can step aside and spoil view.
Well, sort normally it happens? Write what you think and move on! But more about that in the next post.
If you liked this article, put the Like or comment on. And not to miss the new stuff, sign up Canal.
Read more:
The new trend in the finishing slopes
Tank sweats and cries? Tips from Master Oak
remote control buttons do not work? 15 minutes and everything is OK!
Flexible hose, which should be discarded. Master OK
Choosing a faucet thoughtfully. Master OK
Weak pressure for no apparent reason? We solve the problem!