Slopes tiles in the bathroom. All Master Ok!
Finishing slopes tiles - not a standard move, although this option is sometimes found. The most common tiles paste window slopes, but we will look at how to perform finishing a narrow door otkoska, in the case where smew (door frame) was already the wall.
Why no special parts
When decorating the door slope metal or plastic corners can be used, but it was decided to abandon them to the task a little easier to save time on searching. In addition, the tile strength sufficient to withstand and infrequent shock effects. Experience shows that even in a public place without corners slope is long and does not cleave from not strong shocks bags and trolleys. The apartment this probability is even lower.
Initial conditions and materials
Finishing bath was carried out after some time after the doors are already smew wall by a few centimeters. How did went wrong?
1. Cutting strips used slope broken or damaged tiles with integral edge.
2. In order not to spoil or not to re-buy a new tile in inconspicuous places, for example, below eye level or close to the floor, you can use cut from two sides fragments of the desired size, but they must be abraded, file or coarse sand paper.
3. It is much easier to finish the slope when the wall tiles have dried up and so still.
4. Before finishing the top of the slope on the level of exposed supporting rail. But if the adhesive layer is small or make thicker by good adhesion to the wall tile strips remain motionless, so this rack is possible and not useful.
On the door Lutkov modern sample and on the sides, top and has a special groove, which are inserted as needed transoms, ie battens used for finishing slopes in cases where the width Lutkov not enough to cover the entire opening. Here in the slot and insert tiles, just to make sure that it is not how it is filled, for example with foam.
The photo shows the tile comes close to them Lutkov and honey is almost no gap. If desired, you can use an elastic sealant under the color tiles or doors. Grout the gap is better not to fill, as eventually it will still crumble from vibration and vysypletsya.
These are just the highlights, the details can be discussed in private correspondence. Mail contains the channel description. Article from another channel "Master OK" can be found, how to paste over pan tiles. And for regular receipt of practical materials subscribe to the feed and put their assessments.