We make durable shower hose

I am sure that any ordinary Russians have repeatedly faced the problem of cheap plumbers, namely with cheap shower hose, which is enough for up to 1 month of active use.

With the same problem he faced me. Tired of constantly change and resolution of this issue is as old as it turned out, but I did not know about it. And he told me the same seller in the market, which sells these hoses.

The point is simple. Standard plastic tube can not withstand hot water and plastic begins to harden, and then bursts, and we get the fountain of all possible slots. Solved the problem simply take a new hose, or you can have spoiled, to understand it.

At the ends of the hose we see just such a plastic thing, which stretched plastic tube. These plastic caps remove both ends and pull out the old plastic tube of a metal frame.

Next, run to the nearest hardware store and buy here is a PVC hose, as shown in the photo below.

Not to buy the wrong thing, take a plastic tip and pick PVC hose suitable in diameter so that it fits over the plastic tip firmly, and did not walk freely. Typically, its internal diameter is 7 mm and the wall thickness of the hose of PVC is 1 mm.

Your size may vary, so be sure to take the plastic tip.

Next, measure out the desired length of PVC pipe, run it in a metal frame instead of the old plastic tube, put on plastic caps and all, this hose will last you forever.

Important. Do not take the PVC hose with a thick, greater than 1 mm, since it is not very flexible and to use it is not convenient. Although it is a little hot water is softened, but still not very comfortable.