Threw a loop out of the closet. Repair in 15 minutes

Greetings to all subscribers and visitors to my channel. Today let's talk about bread and sore, namely, what to do if the loop break out of the door? Modern budget furniture made of particleboard is far from being the one that was in the Soviet Union. Today there is not so much sawdust and wood dust with a glue that holds together solely through the veneer layer.

Here we see the invoice loop, which screws were pulled out of the door with the meat. There's a lot of options for quick repair. Some put their opening matches or poured glue, and then re-screwed screws. But this repair will last not long.

We now dismantle the present high-quality repairs this breakage of the cabinet door.

For repair, we need:

• electric drill or a hammer;
• wooden chopiki;
• tube of super glue;

To begin, remove the door and laid horizontally. Now, with paintings on metal cut one chopik exactly in half. Ideally, it is better to measure the length of chopika, attach it to the end of the door.

Cut chopik 3-4 mm less than the thickness of the door. But it can be cut exactly in half. If it will be a little stuck, it's not scary. Excess can whittle nozhdachkoy or the same cloth.

Next take drill wood whose diameter must correspond to the diameter chopika. Memory recall that the diameter of 8-9 mm. If you cut off from chopik size (a few millimeters smaller than the thickness of the door), then by his own size mark the drilling depth on the drill and make a marker of electrical tape. It is necessary not to mistakenly drilled through the door.

We begin razsverlivat holes chopiki. Here, be as careful not to drill through the door, and then your spouse you then head to drill and chopiki cram itself)))

Once drilled, check how chopiki included in the hole. They have to go in relative freedom to not have to score them with a hammer, or a laminate on the reverse side of the door may break.

For gluing use glue "Super Moment."

Fill the glue in the hole and insert there chopiki. We give to dry about 15-20 minutes. And still pay attention to the packaging adhesive, it should be written that the composition can be applied to wood.

Next, using the web or remove the protruding portion nazhdachki chopikov that they are zapodletso from the door surface.

Then drill a thin drill holes for the screws. The thickness of drill take no more than 2 mm. This is enough to screw a good sign, and firmly held.

Well that's all, we put the flap back on and fasten properly.

You can be sure that such a fixture would be so long that you have time and change the furniture and fixture will remain in place.

That's all. Thank you all for your attention. Do not skimp on the Huskies and subscribe, I'll be glad to new regular readers.

Author of the idea: Sergey Efimov

Recommended also view other homemade products:

• Making wall organizer tool
• We do glasses of wine bottles with his own hands
• Simple lathe for wood