Rough putty slope. What to consider

I wrote earlier as to seal large gaps on the slope of a layer of foam and polystyreneNow it's time to throw his home plaster and prepare to finish leveling. The layer closer to the frame fillings reached 3-4 cmSo for once perfectly align it was difficult. At this stage, the main thing - lead planeAnd small restart layer completely remove coarse defects and small drops.

after spraying gypsum mixture had to align vertically and horizontally. There really helped previously installed on the corners of the plastic perforated corners. In contrast, unlike aluminum, they are not prone to corrosion on the background of high humidity.

Layer fillings always impose such that it overlaps the frame by at least 0.5 cm. This eliminates the time and blowing through the years.

Control of flatness horizontally held spatula 50 cm, which is longer than the width of the slope, while others work - 35 cm, which is more convenient for me. Surplus contracted over the entire height. With minor irregularities do not bother, because then there will be another layer.

Pay particular attention should go to the equalization layer on the frame side, where he rescues a long spatula.

During shpatlevanija important from time to time to check on the evenness of the slope, looking at it from the side, the angle of the line. So well looked mounds and places with large cavities that can be corrected immediately.

I think a good standard, when the plaster does not reach the canopies of 1-1.5 cm opening flap, which allows to freely open window and, if necessary, easy to remove hardware and sash. It also facilitates access to all places with frame washing.

It remains to wait plaster setting, after which all the plane angles and abutting thoroughly cleans small spatula before applying the next layer. Primer filler between the layers do not use. Doing so only after applying finishki. So far, everything!

Evaluate material andsign upCanal.

ANDit is interesting:

Mole-shovel. strong impression

How to align the slope perforated corners

As far as the thick metal drill screw for 50 cents