How to make a device that cuts the glass bottles. My experience
Conceived to make the cutter of glass bottles, look the information on the Internet and started manufacturing and that's what happened.
making
It was necessary to collect two stops at 90 degrees, they will spin the bottle, resting the bottom and the side wall. Exposing palm bottoms, adjustable cutting height.
As a cutting element took the wheel of the glass cutter, mount it on a nail to the lateral stop, clutching his bottle and rotational motion, we get a smooth cut.
The second option
The first option works well with a conventional bottle, but he did not cope with non-standard forms.
To resolve the situation, mounting with wheels installed on the bar and navigate the ups, it is possible to cut at different heights and exhibit the desired angle. Now the workpiece, cut sides standing resting in stops.
Split and treatment of the edges
Res heated dryer construction and thereafter bottle dropped into the tank with cold water and due to a temperature difference occurred split.
The treatment did edge polishing them to 100 grit sandpaper and 320.
products
Thus, I received two cups and a sugar bowl.
subscribe to the channel, Share the publication with your friends, like, put Like, soon a new story. Your home renovation.