To clean up the wiring to do simple home-made 30 minutes

The idea of ​​this homemade came to me when I have a neighbor switches with sockets, usually I smooth out the wiring knife and side cutters. I think that this is not the final version and it can be modified, but decided to share with you.

making

to fit take a hacksaw blade for metal and make it two pieces, which are then necessary to seal.

As can be seen in the photo, a trim angle and imprisoned, With one longer than the other, because the angle of her I also imprisoned, he will play the role of a knife for the longitudinal slot.

Fabrics sealed tape cut from a plastic bottle, wrapped, drowned and blasted with a hairdryer construction, the strip is tightly compressed product. This tape is used, because he made himself butylkorez, you too can do it (leave a link), and You can simply wrap duct tape.

Test

Strip the wire over the edge, no one will not be difficult, but more time is spent when it is necessary to carefully remove the insulation in the middle. here homemade normally copes, Though not perfect.

Swept insulation knives fit in two places, then turned and made a tool longitudinal section of ground angle. And in sharpening knives is such that you are not afraid to damage the wires, unlike stationery knife.

Why shooting in the middle of the insulation

When did electrician neighbors had two sockets connected in parallel through the wall, and connect them to the old copper cable aluminum scraps, I am using screw terminal blocks.

To this end, and had to remove the insulation from the middle of the cable, the knife is very uncomfortable, and the new device normally happen. Of course, have any specialized tool, But you can do for the house and in this manner, Especially since, he actually free.

How would you finish this home-made or already have a verified?

subscribe to the channel, Share the publication with your friends, like, put the Like. Your home renovation.

How do butylkorez